How much does it cost to replace a power socket in Singapore?

At SG QuickFix, replacing a standard 13A socket starts from $70, and each additional socket in the same visit from $45. A burnt or damaged socket starts from $80, and a USB socket from $90.

How much does it cost to add a new power point?

A new surface-mounted power point starts from $120, a double power point from $120, and relocating an existing point from $150. A 20A point for a high-power appliance starts from $160. Concealed wiring is quoted after a site visit.

Can I replace a power socket myself?

HDB says socket-outlets should be replaced only by licensed electricians. A wrongly connected socket can have its live and neutral swapped or lose its earth, a shock risk that isn't obvious until something goes wrong.

What should I do if my socket is burnt?

Switch off the socket and, if you can, the circuit's MCB at the DB box. Unplug the appliance and don't use the socket again. A burnt socket needs replacing and the wiring behind it checked; replacement starts from $80.

Are universal sockets allowed in Singapore?

The Consumer Product Safety Office warns against installing universal sockets in homes. They usually have no shutters, and un-shuttered socket-outlets are prohibited in homes under SS 638. Universal sockets also can't be registered with the SAFETY Mark.

Do I need a permit to add a power point in an HDB flat?

HDB requires a permit for new 15A power points for air-conditioners or other high-capacity appliances in flats without higher electrical loading. Tell us what the new point is for when you book, so we can check whether your flat needs one.

Are USB wall sockets safe?

USB sockets that carry the SAFETY Mark are safe for charging phones and tablets. They fit in place of a standard 13A socket, so you keep the normal outlets and gain USB ports. USB socket replacement starts from $90.

Electrical Services / service overview

Power Socket Installation & Repair in Singapore

Power socket replacement, repair, relocation and new power points, with separate options for USB sockets and concealed wiring.

WhatsApp us

starting price: From $70
listed on this page: 8 prices
open every day: 24 hours
price confirmed before work: Upfront

Power Socket Installation & Repair services & prices

Choose the work you need and message us on WhatsApp.

Replace standard 13A socket
From $70
Ask about this
Additional socket (same visit)
From $45
Ask about this
Replace damaged / burnt socket
From $80
Ask about this
New surface-mounted power point
From $120
Ask about this
Double power point
From $120
Ask about this
USB socket replacement
From $90
Ask about this
20A power point
From $160
Ask about this
Relocate power point
From $150
Ask about this
Concealed new wiring
Site Quote
Ask about this

Service guide

About power socket installation & repair

Power socket replacement in Singapore starts from $70 at SG QuickFix for a standard 13A socket, with each additional socket in the same visit from $45. Burnt or damaged sockets start from $80, USB sockets from $90, new surface-mounted power points from $120, relocating a power point from $150 and 20A power points from $160.

How long does socket work take?

Job	Typical time	Price from
Replace a standard 13A socket	20–30 min	$70
Each additional socket, same visit	10–20 min	$45
Replace a burnt or damaged socket	30–60 min	$80
USB socket replacement	20–30 min	$90
New surface-mounted power point	1–2 hours	$120
Double power point	1–2 hours	$120
Relocate a power point	1–2 hours	$150
20A power point	1.5–2.5 hours	$160
Concealed new wiring	After a site visit	Site quote

Why do power sockets burn?

A socket burns when a connection overheats: a loose wire behind the faceplate, worn contacts that grip plugs poorly, or a heavy load such as a heater or kettle running for a long time, often through a multi-way adaptor. A 13A socket can supply about 3,000 watts in total, so two high-power appliances on one socket can overload it. Brown marks, a melted plug or a burning smell mean the socket should be switched off and replaced.

What are the rules for power sockets in Singapore?

HDB says socket-outlets should be replaced only by licensed electricians, and electrical installation work generally must be done by a licensed electrical worker (LEW).
Universal sockets, which accept several plug types, usually have no shutters. The Consumer Product Safety Office warns against installing them: un-shuttered socket-outlets are prohibited in homes under the Singapore code of practice SS 638, and universal sockets can't be registered with the SAFETY Mark.
In HDB flats without higher electrical loading, new 15A power points for air-conditioners or other higher-capacity appliances need an HDB permit; ask about this before adding a 20A point.

Common problems

Socket has no power: a tripped MCB, a loose connection, or a fault further along the circuit. Burn marks or a burning smell: an overheating connection. Stop using the socket at once. Sparks when plugging in: a tiny spark can be normal, but repeated or large sparks point to worn contacts. Plugs fall out or feel loose: the socket's contacts are worn. Socket is hot to the touch: overloading or a loose connection. Cracked faceplate: replace it, since live parts may be exposed. Not enough sockets: adding power points is safer than relying on extension cords and multi-way adaptors.

What the work covers

We switch off and isolate the circuit, check the wiring behind the socket for heat damage, and fit a new shuttered socket that carries the SAFETY Mark. Connections are tightened, and the socket is tested for correct polarity and earthing before power is restored. New power points are surface-mounted, with the wiring run along the wall, unless concealed wiring has been quoted.

New 13A socket points
Socket relocation
USB socket upgrades
Circuit safety check

Pricing & conditions

Replacing a standard 13A socket starts from $70, with additional sockets in the same visit from $45. Burnt or damaged sockets start from $80 because the wiring behind them often needs repair too. New power points start from $120 and are surface-mounted. Concealed wiring inside walls or ceilings is quoted after a site visit. The price is confirmed before work starts.

Not included: concealed wiring unless quoted, upgrading the home's electrical loading, and HDB permit applications where they are required.