Quick answer
To fix a sagging kitchen cabinet door, tighten any loose hinge and mounting-plate screws first, then do a cabinet hinge adjustment: set height, side and depth a quarter turn at a time on every hinge. Fill stripped screw holes before adjusting, and replace a cracked or rusted hinge. In Singapore, SG QuickFix adjusts hinges from $50.
SG QuickFix pricesTap to WhatsApp
| Cabinet hinge adjustment | From $50 |
| Cabinet hinge replacement+ hinge | From $60 |
| Additional hinge (same visit) | From $20 each |
| Minor furniture repair | From $60 |
Current SG QuickFix starting prices. Final price confirmed before work begins.
Not sure? WhatsApp us a photo or 10-second video and we'll tell you if it's a DIY fix.
WhatsApp us
Why is my kitchen cabinet door sagging?
A cabinet door usually sags because a hinge screw has loosened in the board, or the hinge has drifted out of adjustment.
Most kitchen cabinets in Singapore flats are built from laminated plywood or particle board. The doors hang on concealed hinges: a 35 mm round cup set into the back of the door, an arm, and a mounting plate screwed to the cabinet side. Each opening levers on those screws. Over months they loosen, the door drops at the handle side and the gaps turn uneven.
The usual causes:
- Loose cup screws in the door or plate screws in the cabinet
- Stripped holes, where the board has crumbled around a screw
- Too few hinges for a heavy or tall door
- Swollen board from a leak under the sink, or from constant humidity
- A worn, cracked or rusted hinge that no longer holds its setting
When the board itself has failed, a cabinet hinge repair service can re-fix the hinge or plate over the damage. A room door that sags and scrapes the floor is a door repair job instead.
Which screw on a concealed hinge does what?
On most concealed hinges, the arm's front screw moves the door sideways, the rear screw sets depth, and the mounting plate sets height.
| Adjustment | Where to turn | What it moves | Typical range |
|---|---|---|---|
| Side (overlay) | Front screw on the hinge arm, nearest the door | Door left or right; evens the gap to the next door | About ±2 mm |
| Depth | Rear screw on the hinge arm | Door in or out from the cabinet front | About +3 / −2 mm |
| Height | Plate cam screw, or the screws of a slotted plate | Door up or down | About ±2 mm (cam plates) |
| Fixing | Cup screws in the door, plate screws in the cabinet | Holds the hinge; not an adjustment | None |
Some older hinges have no depth screw; Blum says to loosen the rear screws on all the door's hinges, slide the door and retighten. Slotted one-piece plates set height the same way.
Which way a clockwise turn moves the door varies between hinges, so turn a quarter, close the door and look.

How do I adjust a cabinet hinge, step by step?
Tighten the fixing screws first, then set height, side and depth in small turns on every hinge of the door.
You need a #2 Phillips or Pozidriv hand screwdriver.
- Open the door fully and check each hinge for cracks, rust or a wobbling arm.
- Tighten the cup screws in the door and the plate screws in the cabinet by hand, until snug.
- If a screw spins without gripping, stop and repair the hole first.
- Set height with the plate's cam screw, or loosen the plate screws, lift the door and retighten.
- Set side with the front arm screw, a quarter turn at a time, until the gaps are even.
- Set depth with the rear arm screw until the door sits flush with its neighbours.
- Make the same change on every hinge of that door, then open and close it several times.
Mistakes to avoid
- Adjusting before tightening. A loose plate lets the door drop again within days.
- Turning one hinge only. The other hinge fights it, and the door twists.
- Driving screws at full power. A drill driver on a high clutch setting strips the board in one go; finish by hand.
- Fitting longer screws in the door. Doors are thin; a long screw can break through the front.
- Mixing hinges and plates from different brands. Plates are made for their own hinge system.
Why does my cabinet door keep popping open or slamming?
A door that pops open is usually rubbing its neighbour, pushed by its contents or not clipped onto its plate; slamming means a worn damper.
Close the door slowly and watch the edges. If it touches the next door or the frame, it bounces back; reset the side and depth screws for an even gap. Move packed items back from the door. If the door has been taken off, press each hinge arm onto its plate until it clicks.
Soft-close that's too strong for a small, light door can make it stop short or close too slowly. Blum's BLUMOTION hinges let you switch soft-close off on one hinge: slide the switch towards the arm, then close the door once. Salice SILENTIA+ hinges have a closing-strength switch; Hettich's Sensys literature lists none.
A push-to-open latch must match its hinges. Soft close plus push opening needs a combined system, such as Blum TIP-ON BLUMOTION or Hettich Push to open Silent.
A soft-close door that slams after a few years has a worn damper, and usually needs a new hinge. A drawer that won't close properly is a runner problem, not a hinge one.
What if the screw holes are stripped or the hinge is broken?
Stripped holes need filling or a repair plate before any adjustment will hold; a cracked or rusted hinge needs replacing.
Fixing stripped screw holes
- Plate screws in the cabinet side: glue hardwood toothpicks or a dowel into the hole, let it cure, trim flush and drill a pilot hole. Or move the plate onto fresh board.
- Cup torn out of the door: fit a hinge repair plate: a metal plate with its own cup socket, screwed over the torn hole. Or drill a new cup hole in sound board with a 35 mm bit and jig.
- Swollen, crumbly board under the sink: fix the leak first with a water leak repair, or the board keeps failing.
Choosing a replacement hinge
Take one old hinge to the shop and match:
- Cup: 35 mm is standard.
- Overlay: full overlay (the door covers the cabinet side), half overlay (two doors share one side) or inset (the door sits inside the frame). Salice, for example, makes these as 0 mm, 9 mm and 17 mm cranks.
- Opening angle: 95° to 110° for most doors; 165° wide-angle where the door must open right back.
- Soft-close or not, and clip-on or slide-on mounting.
If you're unsure the plate matches, replace the hinge and plate together. To swap a clip-on hinge, open the door fully, press the release lever on the arm and lift it off the plate. Unscrew the cup screws, fit the new hinge in the same holes, then press the arm onto the plate until it clicks.

How much does cabinet hinge repair cost in Singapore?
SG QuickFix adjusts a cabinet hinge from $50 and replaces one from $60, plus the hinge itself.
| Job | Price |
|---|---|
| Cabinet hinge adjustment | From $50 |
| Cabinet hinge replacement (plus the hinge) | From $60 |
| Each additional hinge on the same visit | From $20 each |
| Crumbled board, torn cup hole or panel repair | From $60 |
The price goes up when holes need filling or plating, when a matching hinge must be sourced, or when the carcass is swollen. Each job is priced separately. For an accurate price, send a photo of the hinge with the door open and one of the whole door showing the gap. See all cabinet repair prices, or the full handyman price list for Singapore.
Most hinge adjustments are safe to do yourself; these are the cases for a handyman.
| Safe to DIY if… | Call a professional if… |
|---|---|
| The screws are loose but still grip when tightened | Screws spin in crumbled board, or the cup has torn out: a handyman |
| You're evening out gaps with the side, height and depth screws | A heavy or tall door needs an extra hinge drilled: a handyman |
| You're swapping a like-for-like clip-on hinge into the same holes | You can't find a hinge or plate that matches |
| A light door stops short and its soft-close can be switched off | The board under the sink is swollen: have a plumber fix the leak first |
What happens when you WhatsApp us?
- 1WhatsApp us a photo or short video of the problem.
- 2We confirm the price before we come.
- 3A technician arrives at the agreed time.
- 4The job is done and you pay only the confirmed price.
Cabinet / Furniture
From $50
- Hinge & runner replacement
- Door realignment
Cabinet / Furniture FAQs
Blum's hinge guide recommends 2 hinges for a door of 4 to 6 kg and 3 hinges for 6 to 12 kg, for doors up to 600 mm wide. Count the handle in the weight. Tall, narrow doors such as larder units may need 3 hinges for stability even at around 6 kg, and wider doors need an extra hinge.
Yes. The damper inside a soft-close hinge weakens over the years, so the door starts to slam, bounce or close unevenly. On most hinges with a built-in damper it can't be serviced, so the hinge is replaced. Replace both hinges on the door together so they close at the same speed.
Usually, yes. If the doors already use 35 mm cup hinges, swap them for soft-close hinges with the same overlay, opening angle, plate and screw pattern (usually the same brand), so the existing holes line up. Take one old hinge to the hardware shop to match it. Older doors with other hinge types may need new holes drilled.
Only with a system built for it. Blum's TIP-ON BLUMOTION and Hettich's Push to open Silent combine push opening with soft closing. Other push latches must match the hinge: Blum pairs standard TIP-ON with unsprung hinges, and Hettich makes its Push to open Magnet for hinges without self-closing and its Push to open Pin for hinges with it.
Kitchen cabinet hinges rust mainly near the sink, dishwasher and hob, where steam and splashes reach the metal. Plated steel hinges rust fastest once the coating is scratched. Wipe spills dry, fix any leak under the sink, and replace rusted hinges, because rust stiffens the arm and weakens the spring.
A cabinet hinge adjustment usually takes a few minutes per door once the screws grip. Replacing a hinge typically takes 30 to 60 minutes per door, including matching the plate. Stripped holes filled with glued dowels take longer, because the glue needs time to cure before the screws go back in.
Related services
Cabinet / Furniture
From $50
View serviceWater Leak Repair
From $60
View serviceDoor Repair
From $60
View serviceServing Bedok, Pasir Ris, Punggol, Sengkang and Tampines and island-wide.
Sources & updates
- Blum: CLIP top BLUMOTION hinge assembly and adjustment instructions (H002), checked 1 Oct 2026
- Blum: Euro hinge assembly and adjustment sheet (older CLIP hinges and mounting plates), checked 1 Oct 2026
- Blum: Number of hinges per door, checked 1 Oct 2026
- Blum: TIP-ON for doors (push-to-open), checked 1 Oct 2026
- Hettich: Hinges catalogue (Sensys adjustment and push-to-open), checked 1 Oct 2026
- Salice: SILENTIA+ soft-close hinges, series 100/105, checked 1 Oct 2026
- Meteorological Service Singapore: Climate of Singapore, checked 1 Oct 2026
- MyNiceHome (HDB): HDB move-in guide, checked 1 Oct 2026
- HDB: Important information on renovations, checked 1 Oct 2026
- Updated 1 Oct 2026: First published
Related guides

Drawer Not Closing Properly? How to Fix or Replace the Runners
A drawer usually won't close properly because something is jammed behind it, a runner has come off its track or loosened, or a ball-bearing runner's retainer has slipped. Empty it, clear the back and re-seat it first. Bent runners or missing bearings need replacing. In Singapore, SG QuickFix adjusts a drawer from $50.
Updated 12 Nov 2026 · 7 min read

How to Install a Towel Rack on Tiles Without Cracking Them
To drill bathroom tiles without cracking them, use a diamond or carbide tile bit with hammer mode off, put masking tape over the mark, start slowly and keep the bit cool with water. Push the wall plug past the tile, and never drill directly above or below taps in an HDB bathroom. SG QuickFix installs a towel rack from $50.
Updated 15 Nov 2026 · 6 min read

HDB EASE Grab Bars vs Private Install: Eligibility and Cost
HDB's EASE programme installs grab bars in HDB flats for Singapore Citizen households and rental tenants with a family member aged 65 or above, or 60 to 64 needing help with at least 1 daily activity. Owners pay $26.15 to $65.40 for the first set; rental flats pay nothing. Otherwise, SG QuickFix installs a grab bar privately from $60.
Updated 14 Nov 2026 · 7 min read
Still need help with cabinet / furniture?
WhatsApp us a photo and get a clear price before we come. Open 24 hours, island-wide.
This guide is general information for homes in Singapore. It is not professional, legal or safety advice for your specific situation. Electrical, gas and some plumbing work can be dangerous, and Singapore law requires certain jobs to be done by licensed workers. Any work you carry out yourself is at your own risk, and SG QuickFix accepts no responsibility for any loss, damage or injury arising from the use of this information. Prices shown are current starting prices, may change, and the final price is confirmed before any work begins. Rules and figures from HDB, PUB, EMA, SP Group and town councils were correct when last checked; please confirm with the relevant authority before acting.
