Quick answer
To drill bathroom tiles without cracking them, use a diamond or carbide tile bit with hammer mode off, put masking tape over the mark, start slowly and keep the bit cool with water. Push the wall plug past the tile, and never drill directly above or below taps in an HDB bathroom. SG QuickFix installs a towel rack from $50.
SG QuickFix pricesTap to WhatsApp
| Towel rack installation | From $50 |
| Additional accessory (same visit) | From $25 |
| Shower rack installation | From $50 |
| 3-item installation bundle | From $100 |
| 5-item installation bundle | From $140 |
Current SG QuickFix starting prices. Final price confirmed before work begins.
Need it fixed? WhatsApp us a photo and we'll confirm the price before we come.
WhatsApp us
How do you drill bathroom tiles without cracking them?
Use a tile or diamond bit with hammer mode off, tape the mark, start slowly and keep the bit cool. Most cracks come from hammer action, heat or pressing too hard.
A glazed tile is hard on top and brittle underneath. Hammer action shocks it, and a blunt or wrong bit makes you push harder, overheating the glaze. Tape stops the bit wandering, and water keeps a diamond bit cool.
Then push the wall plug in past the tile layer, so it expands inside the wall. A plug that expands in the tile can split it when you tighten the screw. HDB: important information on renovations limits fasteners to 6 mm in diameter and 40 mm deep in all flat types (Ferrolite walls have their own HDB rules), so choose screws and plugs short enough to stay within 40 mm.
If you would rather not risk it, SG QuickFix offers bathroom accessories installation for racks, holders and hooks.
Which drill bit should you use for ceramic, porcelain or marble?
Ceramic takes a carbide tile bit or a diamond bit. Porcelain and marble need a diamond bit, run slowly with water.
| Tile | Best bit | Speed and cooling | Watch out for |
|---|---|---|---|
| Glazed ceramic | Carbide tile (spear) bit or diamond bit | Slow start, then steady | Glaze chipping at the edge of the hole |
| Porcelain | Diamond bit | Slow, light pressure, water spray | Carbide bits blunting and overheating |
| Marble or natural stone | Diamond bit | Low speed, water, no hammer | Brittle edges and staining from wet slurry |
BTO bathrooms usually have porcelain: HDB's MyNiceHome move-in guide says glazed porcelain tiles are used in BTO kitchens and bathrooms. On marble, test the bit on an offcut and wipe the slurry off at once.

How do you install a towel rack on a tile wall, step by step?
Mark the holes, drill the tile gently, drill the wall behind, then seal, plug and screw. Most towel racks take 2 to 4 holes.
- Hold the rack against the wall, check it is level, and mark the holes; the bar is typically 1.1 to 1.2 m above the floor.
- Cover each mark with 2 layers of masking tape and re-mark on the tape.
- With hammer mode off, drill the tile slowly with a tile or diamond bit, spraying a little water.
- Once through the tile, switch to a masonry bit and drill into the wall behind.
- Drill about 5 mm deeper than the plug, keeping the screw within HDB's 40 mm depth limit, and match the plug to the bit.
- Put a dab of sanitary silicone in each hole, then tap the plug in until it sits past the tile.
- Fix the rack with stainless steel screws, and stop tightening once it is firm.
If the rack still wobbles, the plug is loose in the wall. More torque won't fix it and can crack the tile.
Where do pipes and wires run behind HDB bathroom tiles?
Wiring runs up, down and sideways from sockets, switches and the heater point; supply pipes run above and below taps, the mixer and the heater.
For flats with concealed wiring from HDB, HDB's drilling sketch marks 150 mm-wide no-drill strips that run straight up and down from every power socket, lighting switch and heater point, and straight across to either side. The strips are 300 mm or 450 mm wide where 2 or 3 are mounted together, and HDB calls the sketch a guide only.
HDB's sketch covers wiring, not pipes. In most HDB bathrooms, supply pipes run straight up or down from each tap, mixer and shower outlet, and often sideways between the heater, mixer and basin tap. The safest spots are well to the side of these lines, often beside the door. Pipe detectors often miss plastic pipes behind tiles, so trust the layout more.
For other walls in the flat, see which HDB walls you can drill.
What should you do if a tile cracks or you hit a pipe?
If water appears in the hole, stop, shut the water off at the stopcock and call a PUB Licensed Plumber. A cracked tile can wait; a pipe leak can't.
For a leak, HDB: home care guide on pipes says to shut the stopcock at the PUB water sub-meter and engage a PUB Licensed Plumber. PUB reserves water pipe repairs for PUB Licensed Plumbers, not handymen. The Ministry of Sustainability and the Environment (MSE) says homeowners maintain the pipes and fittings in their own units, so the repair is usually yours to pay for.
For a cracked tile, stop drilling. A hairline crack that the rack's flange will cover can be sealed with silicone and hidden. A visible crack needs the tile replaced, which requires a matching spare. HDB allows tile cutting only from 9am to 5pm on weekdays that aren't public holidays or festival eves; see HDB drilling time.
In a new flat, check the date first. HDB bars owners from replacing toilet wall and floor finishes for 3 years from the block's completion, to protect the waterproofing. Replacing even one tile removes the finish, so in a block under 3 years old, ask HDB first.
Should you DIY or call a pro, and what does it cost?
DIY a towel rack on ceramic or porcelain tile if you have the right bit. Call a pro for marble or granite, spots near pipes or wiring, or several items.
Adhesive towel racks avoid holes and suit renters, but humidity and soap weaken the bond. They suit hand towels, not heavy wet bath towels. For other no-drill options, see hanging a heavy mirror or shelf without drilling. The DIY route costs a tile or diamond bit, plugs, stainless screws and silicone, if you already own a drill.
SG QuickFix installs a towel rack from $50, and one towel rack usually takes under an hour. Each additional accessory on the same visit costs from $25. For a full set, a 3-item installation bundle costs from $100 and a 5-item bundle costs from $140. Bathroom shelves come under shelf installation. Grab bars are covered in HDB EASE grab bars, and every job is in the full handyman price list for Singapore.
For an accurate price, send a photo of the wall showing the taps and heater, and say whether the tiles are ceramic, porcelain or marble.
| Safe to DIY if… | Call a professional if… |
|---|---|
| The tiles are ceramic, or porcelain and you have a diamond bit | The tiles are marble or granite, or you have no diamond bit for porcelain |
| The spot is well clear of taps, mixers, the heater and switches | The only space is near the mixer, shower or heater |
| The rack needs 2 to 4 holes and you can drill with hammer off | You are fitting several accessories and want one visit |
| You are a renter using an adhesive rack for light towels | Water appears in a hole: call a PUB Licensed Plumber, and don't attempt the pipe repair |
What happens when you WhatsApp us?
- 1WhatsApp us a photo or short video of the problem.
- 2We confirm the price before we come.
- 3A technician arrives at the agreed time.
- 4The job is done and you pay only the confirmed price.
Bathroom Accessories Installation
From $50
- Mirrors, racks & holders
- Grab bars for safety
Bathroom Accessories Installation FAQs
You can, but it isn't always better. Grout drills easily, yet the bit can chip the tile edges on both sides, and a plug set in grout holds less well. Drill through the tile with the right bit, and use the grout line only when the towel rack's holes happen to land there.
Drill tiles slowly. Start at low speed so the bit bites into the glaze instead of wandering, then keep a steady low-to-moderate speed with light pressure. Heat and force are what crack tiles, so let the bit do the work and cool it with a little water as you go.
Not through the tile itself. A standard masonry bit tends to skate on the glaze and chip it, and it struggles with hard porcelain. Use a carbide tile bit or a diamond bit for the tile, then switch to a masonry bit, with hammer mode on, once you reach the concrete or block wall behind.
There is no Singapore standard, but a towel rail is typically fixed with the bar about 1.1 to 1.2 m above the floor, so a full-size bath towel hangs clear of the floor. Fix it lower for children or wheelchair users, and keep it away from the shower spray if you want towels to dry.
Yes. HDB's rule for new flats stops owners from replacing the toilet wall and floor finishes for 3 years from the block's completion date, to protect the waterproofing. Drilling a few holes for a towel rack isn't replacing the finish. Report any existing cracked tiles within 1 month of key collection, before you drill.
It is good practice. Put a small dab of neutral-cure sanitary silicone into each hole before driving the screw, so water running down the wall can't seep behind the tile. A bead around the top of the towel rack's wall flange adds a second seal on walls that get splashed often.
Related services
Bathroom Accessories Installation
From $50
View serviceShelf / Mirror / Picture Installation
From $45
View serviceServing Bedok, Pasir Ris, Punggol, Sengkang and Tampines and island-wide.
Sources & updates
- HDB: Important information on renovations, checked 1 Oct 2026
- HDB: Drilling into walls with concealed electrical wiring (PDF), checked 1 Oct 2026
- HDB: Home care guide, pipes, checked 1 Oct 2026
- PUB: Plumbing works (licensed plumbers and simple works), checked 1 Oct 2026
- MSE: Written reply on maintenance checks for water pipes, checked 1 Oct 2026
- MyNiceHome (HDB): HDB move-in guide, checked 1 Oct 2026
- Updated 1 Oct 2026: First published
Related guides

HDB EASE Grab Bars vs Private Install: Eligibility and Cost
HDB's EASE programme installs grab bars in HDB flats for Singapore Citizen households and rental tenants with a family member aged 65 or above, or 60 to 64 needing help with at least 1 daily activity. Owners pay $26.15 to $65.40 for the first set; rental flats pay nothing. Otherwise, SG QuickFix installs a grab bar privately from $60.
Updated 14 Nov 2026 · 7 min read

Can I Drill HDB Walls? Structural, Partition and Shelter Walls
Yes, you can drill HDB walls for shelves, mirrors and TVs without a permit, if screws and bolts stay within 6 mm diameter and 40 mm depth and avoid concealed wiring. Hacking needs HDB approval, structural walls can't be hacked, and the household shelter has stricter SCDF rules. SG QuickFix installs a standard wall shelf from $45 each.
Updated 13 Nov 2026 · 7 min read

Drawer Not Closing Properly? How to Fix or Replace the Runners
A drawer usually won't close properly because something is jammed behind it, a runner has come off its track or loosened, or a ball-bearing runner's retainer has slipped. Empty it, clear the back and re-seat it first. Bent runners or missing bearings need replacing. In Singapore, SG QuickFix adjusts a drawer from $50.
Updated 12 Nov 2026 · 7 min read
Still need help with bathroom accessories installation?
WhatsApp us a photo and get a clear price before we come. Open 24 hours, island-wide.
This guide is general information for homes in Singapore. It is not professional, legal or safety advice for your specific situation. Electrical, gas and some plumbing work can be dangerous, and Singapore law requires certain jobs to be done by licensed workers. Any work you carry out yourself is at your own risk, and SG QuickFix accepts no responsibility for any loss, damage or injury arising from the use of this information. Prices shown are current starting prices, may change, and the final price is confirmed before any work begins. Rules and figures from HDB, PUB, EMA, SP Group and town councils were correct when last checked; please confirm with the relevant authority before acting.
