Quick answer
Yes, you can drill HDB walls for shelves, mirrors and TVs without a permit, if screws and bolts stay within 6 mm diameter and 40 mm depth and avoid concealed wiring. Hacking needs HDB approval, structural walls can't be hacked, and the household shelter has stricter SCDF rules. SG QuickFix installs a standard wall shelf from $45 each.
SG QuickFix pricesTap to WhatsApp
| Standard wall shelf installation | From $45 each |
| Additional drill hole (same visit) | From $5–$10 |
| Tile / marble / granite drilling | +$40–$60 per job |
| Small mirror installation | From $50 |
| Large / heavy mirror installation | From $80 |
Current SG QuickFix starting prices. Final price confirmed before work begins.
Need it fixed? WhatsApp us a photo and we'll confirm the price before we come.
WhatsApp us
Can I drill into my HDB walls?
Yes. You can drill fixing holes in HDB walls without a permit, as long as each screw, nail or bolt stays within HDB's size limit.
HDB's important information on renovations says fasteners in walls must not exceed 6 mm in diameter and 40 mm in penetration depth, for all types of flats. HDB's building-works table lists items such as mirror wall panels as needing no permit, within that limit.
Drilling is not hacking. Any demolition or hacking of a wall, partial or complete, needs HDB's prior written approval. Structural members such as reinforced concrete walls, columns, beams and slabs can't be hacked at all.
See shelf and mirror installation prices.
| Work | What the rules say | Who does it |
|---|---|---|
| Fixing holes for shelves, mirrors, TVs | No permit; fasteners up to 6 mm wide and 40 mm deep | You or a handyman |
| Hacking or removing a partition wall | HDB's prior written approval | HDB-listed (DRC) renovation contractor |
| Removing a non-load-bearing concrete wall | HDB approval plus a Professional Engineer | Contractor and PE |
| Hacking a structural wall, column, beam or slab | Not allowed | No one |
| Fixings inside the household shelter | Up to 50 mm deep, non-metallic inserts, removable screws | You, under SCDF rules |
| New power points or wiring | EMA licensed electrical worker; no new wiring embedded in concrete | Licensed electrical worker |
What are HDB walls made of?
HDB flats use four wall types: reinforced concrete, brick or hollow block, drywall, and Ferrolite panels.
HDB's building works guidelines describe the last three as lightweight, non-structural partitions. MyNiceHome says new BTO partitions are Severe Duty grade drywall. Identify the wall before you buy plugs.
| Wall type | Where you usually find it | How to tell | Bit and anchor |
|---|---|---|---|
| Reinforced concrete | Structural walls, the household shelter, many walls between flats | Dull knock, drill resists, grey dust | Masonry or SDS bit on hammer; nylon plug |
| Brick or hollow block | Partitions in many older flats | Solid knock, red or grey dust; hollow block gives suddenly | Masonry bit, light hammer; plug the brick, not the joint; cavity anchor in hollow block |
| Drywall | Bedroom and living-room partitions in new BTO flats | Hollow knock, white gypsum dust | No hammer; plasterboard plugs under 12 kg a point, heavy-duty anchors under 25 kg |
| Ferrolite | Bedroom partitions in some new flats | Knocks like concrete; check your flat's guidelines on MyHDBPage | Steel cavity anchor (20 kg) or M10 rod in injection mortar (50 kg) |
Ferrolite walls have their own HDB rules: drill about 22 mm deep, bolts no longer than 50 mm, 20 kg or 50 kg per bolt depending on the anchor. For TVs on drywall, see mounting a TV on an HDB partition wall; for heavy items, see how to hang heavy mirrors and shelves on HDB walls.

How do you know if a wall is structural?
Check your flat's floor plan first, then the wall itself.
Use the plan from your sales brochure, or buy one for $5 through HDB's Purchase of Residential Floor Plan e-Service, as HDB's renovation permit page explains. Walls drawn thicker are often structural, but only HDB can confirm it, so check before any hacking.
A dull knock and grey dust point to concrete, which may be structural; a hollow knock means drywall, which never is.
Concrete is not always structural, but even a non-load-bearing concrete wall needs a Professional Engineer before it comes down.
For drilling, "structural" matters less than you'd think: HDB's 6 mm and 40 mm limit applies to ordinary walls, structural or not. The household shelter and Ferrolite walls have their own rules. A hole right through a wall, such as for pipes, is not a fixing hole: check with HDB first.
Can I drill the household shelter wall?
Yes, but only on the inside face and only with shallow, removable fixings; the outside face takes power-driven nails only.
Every HDB flat built since 1996 has a household shelter. HDB's household shelter guide says its walls, floor, ceiling and door must not be hacked or drilled. SCDF's permitted works list sets out the exceptions.
On the inside face of the walls and ceiling slab, you may drill up to 50 mm deep for non-metallic inserts with removable screws. That covers pictures, cabinets, shelves, a wall fan or ceiling lights. You're responsible for the inserts' strength, and every fixture must come off within 48 hours if the authorities ask.
On the outside face, SCDF allows only power-driven nails, up to 75 mm. Power-driven nails are not allowed inside. Hacking either face, tampering with the door or vents, and fixtures that can't easily be removed are not allowed.
The outside face is often the living-room TV wall. Drilled screw fixings are not on SCDF's permitted list there, so mount the TV on another wall or ask HDB first.
Where is it safe to drill an HDB wall?
Drill outside the bands around sockets, switches and heater points, the lines above and below taps, and the top of Ferrolite walls.
HDB's sketch for drilling near concealed wiring marks 150 mm-wide no-drill strips running from each socket, switch and heater point straight up to the ceiling, down to the floor and sideways across the wall (300 mm for two accessories together, 450 mm for three), plus a 150 mm band below the ceiling. HDB calls it a guide only, and rewired flats can differ.
Treat lines straight above and below taps, mixers and water heaters as pipe routes. On Ferrolite, HDB says not to drill within 200 mm below a ceiling or beam, and to drill only about 22 mm deep.
- Confirm the wall type by knocking and checking the floor plan.
- Mark every hole, then check each sits outside the bands around sockets, switches and heater points.
- Scan with a cable and pipe detector; some PVC conduit won't show, so respect the bands anyway.
- Pick the bit and anchor for the wall, within 6 mm diameter and 40 mm depth.
- Use hammer mode only on concrete or brick; on tiles, use a tile bit without hammer until you're through.
- If you hit metal, see sparks or water, stop and switch off the power or water.
Common mistakes are hammering drywall or tile, plugs spinning in gypsum or hollow block, and drilling through to the next room. For tiled walls, see installing a towel rack on tiles without cracking them.
Should you drill it yourself or call a professional?
Light items on a known wall are fair DIY. Heavy items, tiles, the shelter or an unknown wall are worth handing over.
SG QuickFix installs a large mirror from $80 and a small mirror from $50. Extra holes in the same visit cost from $5–$10 each, and tile, marble or granite drilling is an add-on (+$40–$60 per job). For a TV, see TV mounting on concrete, brick and partition walls: a 44–55" set costs from $80. For an accurate price, send a photo of the wall with nearby sockets and the item's weight. See also HDB drilling hours and the full handyman price list for Singapore.

| Safe to DIY if… | Call a professional if… |
|---|---|
| You're hanging a light picture frame, hook or small shelf | The item is a heavy mirror, cabinet or large TV |
| You know the wall type and have the right plug | You can't tell drywall, block or Ferrolite apart |
| Every hole is outside the bands around sockets and switches | The only good spot sits near a socket, tap or heater point |
| The wall is plain concrete, brick or drywall | The wall is tiled, marble or the household shelter |
| — | Never hack a wall or add wiring yourself: hacking needs HDB approval, and wiring needs a licensed electrical worker |
What happens when you WhatsApp us?
- 1WhatsApp us a photo or short video of the problem.
- 2We confirm the price before we come.
- 3A technician arrives at the agreed time.
- 4The job is done and you pay only the confirmed price.
Shelf / Mirror / Picture Installation
From $45 each
- Floating & bracket shelves
- Anchors rated to wall type
Shelf / Mirror / Picture Installation FAQs
It's best not to. SCDF allows only power-driven nails on the outside face of an HDB household shelter wall, and drilled screw fixings are not on its permitted list. Mount the TV on another wall; only power-driven nails are allowed on the shelter's outside face.
Under SCDF's current technical requirements for household shelters, shelter walls are at least 200 to 300 mm thick, depending on the storey height and layout. Older HDB flats were built to earlier editions of the code, so the exact thickness of your shelter wall can differ.
Yes, for fixing holes within HDB's 6 mm diameter and 40 mm depth limit. Keep fixings short so they don't come through the other side. Making any opening in a wall between two HDB flats needs HDB's approval first, and a reinforced concrete wall also needs a Professional Engineer.
Stop drilling, let go of the drill and don't touch the bit. For a wire, switch off the main switch at your DB box and call an EMA licensed electrical worker. For a pipe, shut the stopcock at your PUB water sub-meter and call a PUB Licensed Plumber. Don't plaster over the hole.
Yes. MyNiceHome says a set of sample anchors, from light to heavy duty, is left in the household shelter of new BTO flats for wall cabinets, TVs and other fixtures. Use each anchor only within its rated load, keep screws within 6 mm diameter and 40 mm depth, and stay clear of concealed wiring.
Yes, for light fittings and similar fixtures. HDB limits fasteners to 6 mm diameter and 40 mm depth, and its wiring guide limits ceiling holes to 40 mm deep. Concealed conduits run in the ceiling slab too, so scan first. Wiring a new light is work for an EMA licensed electrical worker.
Related services
Serving Bedok, Pasir Ris, Punggol, Sengkang and Tampines and island-wide.
Sources & updates
- HDB: Important information on renovations, checked 1 Oct 2026
- HDB: Renovation guidelines, building works, checked 1 Oct 2026
- HDB: Renovation guidelines, electrical works, checked 1 Oct 2026
- HDB: Drilling into walls with concealed electrical wiring (PDF), checked 1 Oct 2026
- HDB: Household shelter, checked 1 Oct 2026
- SCDF: Permitted and not permitted works for household shelters (PDF), checked 1 Oct 2026
- SCDF: Technical requirements for household shelters 2023, clause 2.3 wall and slab thickness, checked 1 Oct 2026
- MyNiceHome (HDB): HDB move-in guide, checked 1 Oct 2026
- HDB: Drywall user guide (PDF), checked 1 Oct 2026
- HDB: Application for a renovation permit, checked 1 Oct 2026
- Updated 1 Oct 2026: First published
Related guides

How to Install a Towel Rack on Tiles Without Cracking Them
To drill bathroom tiles without cracking them, use a diamond or carbide tile bit with hammer mode off, put masking tape over the mark, start slowly and keep the bit cool with water. Push the wall plug past the tile, and never drill directly above or below taps in an HDB bathroom. SG QuickFix installs a towel rack from $50.
Updated 15 Nov 2026 · 6 min read

HDB EASE Grab Bars vs Private Install: Eligibility and Cost
HDB's EASE programme installs grab bars in HDB flats for Singapore Citizen households and rental tenants with a family member aged 65 or above, or 60 to 64 needing help with at least 1 daily activity. Owners pay $26.15 to $65.40 for the first set; rental flats pay nothing. Otherwise, SG QuickFix installs a grab bar privately from $60.
Updated 14 Nov 2026 · 7 min read

Drawer Not Closing Properly? How to Fix or Replace the Runners
A drawer usually won't close properly because something is jammed behind it, a runner has come off its track or loosened, or a ball-bearing runner's retainer has slipped. Empty it, clear the back and re-seat it first. Bent runners or missing bearings need replacing. In Singapore, SG QuickFix adjusts a drawer from $50.
Updated 12 Nov 2026 · 7 min read
Still need help with shelf / mirror / picture installation?
WhatsApp us a photo and get a clear price before we come. Open 24 hours, island-wide.
This guide is general information for homes in Singapore. It is not professional, legal or safety advice for your specific situation. Electrical, gas and some plumbing work can be dangerous, and Singapore law requires certain jobs to be done by licensed workers. Any work you carry out yourself is at your own risk, and SG QuickFix accepts no responsibility for any loss, damage or injury arising from the use of this information. Prices shown are current starting prices, may change, and the final price is confirmed before any work begins. Rules and figures from HDB, PUB, EMA, SP Group and town councils were correct when last checked; please confirm with the relevant authority before acting.
