Quick answer
A toilet bowl leaking at the base is usually a dripping hose, a leaking cistern-to-bowl joint, a failed seal under the bowl, or a crack. In Singapore HDB flats, first use a dry-tissue test to rule out shower splash or bidet water. Lifting or resealing the bowl is PUB Licensed Plumber work. SG QuickFix diagnoses toilet bowl leaks from $80.
SG QuickFix pricesTap to WhatsApp
| Toilet bowl leak diagnosis | From $80 |
| Flexible hose replacement+ hose | From $60 |
| Internal cistern repair | From $80 |
| Flush valve replacement+ part | From $90 |
| Supply + install basic toilet bowl | From $300 |
Current SG QuickFix starting prices. Final price confirmed before work begins.
Not sure? WhatsApp us a photo or 10-second video and we'll tell you if it's a DIY fix.
WhatsApp us
Why is my toilet bowl leaking at the base?
Water at the base of a toilet bowl usually comes from a dripping hose, the cistern-to-bowl joint, the seal under the bowl, or a crack.
Most HDB flats have a floor-mounted bowl with an S-trap outlet, joined to the floor pipe by a rubber pan collar and bedded in white cement or sealant. When that collar shifts or perishes, dirty water escapes each time you flush. Clean water, by contrast, usually starts higher up and runs down to the base. Where the water appears, and when, points to the cause.
| What you see | Likely cause |
|---|---|
| Floor wet after a shower or bidet use, every joint dry | Splash or spray water, not a leak |
| Drips behind the bowl, even without flushing | Flexible hose, angle valve (which HDB calls the ball valve) or bidet spray hose |
| Water under the cistern, where it sits on the bowl | Cistern-to-bowl joint or bolt washers |
| Water at the base seam only after you flush | Pan collar or outlet seal |
| A dark line in the china that stays wet | Cracked bowl or cistern |
| Floor wet away from the bowl, or a stain on the ceiling below | Floor trap, grout or waterproofing, not the toilet |
Most of these are part repairs under a toilet repair service.
How do I find where my toilet is leaking from?
Dry everything, then use tissue paper and the angle valve beside the cistern to see which joint gets wet first.
- Wipe the bowl, cistern, hoses and floor completely dry.
- Tuck dry tissue along the base seam, under the cistern joint and around each hose nut.
- Wait 10 minutes without flushing, then check which tissue is wet.
- Flush 2 or 3 times and check the tissue again.
- Close the angle valve, unscrew the push button, lift the cistern lid and pencil-mark the water level inside.
- Wait 30 minutes, then check the mark and the floor.
What the results mean:
- Tissue wet before any flush: the supply side, meaning the hose, the angle valve or the bidet spray hose, which often shares the valve behind the bowl.
- Wet at the base seam only after flushing: the pan collar or outlet seal.
- Level drops with the valve closed, floor dry: water is passing into the bowl.
- Level drops and the floor gets wet: the cistern-to-bowl joint or a crack.
- Every tissue dry, floor still damp: splash from the shower or bidet spray. Keep the area dry for a day and retest.
If the drip is at the bidet hose or spray head, see the guide to a leaking bidet spray.

Is water leaking into the toilet bowl instead?
If water trickles into the bowl without a flush, the cistern is leaking, not the bowl.
PUB's water-saving items page says to look for water streaks running into the bowl, or ripples on its surface. To confirm, drop a leak detection tablet or a few drops of food colouring into the cistern, don't flush, and wait 10 to 20 minutes. Coloured water in the bowl means a leak. PUB says a silent cistern leak can waste more than 10 litres an hour.
For water that keeps flowing into the pan after flushing, HDB's toilets guide lists the causes together: an angle valve (HDB's ball valve) not fully open, a float set too high or too low, or an outlet valve rubber seal that is worn or stuck with fine particles.

The fix is usually the flush valve or its seal inside the cistern; see the guide to a toilet that keeps running after flushing.
Can a leaking toilet damage the flat below?
Yes, a toilet bowl leaking at the base can soak the floor and, where the waterproofing is worn, reach the ceiling of the flat below.
HDB's ceiling leaks guide says ceiling leaks come from the flat above, through the concrete floor slab, usually because the waterproof membrane and screed have worn. They are typical in toilets. A base leak left for weeks keeps that screed wet.
HDB says owners maintain their flat's floor and ceiling slabs, so if the slab needs repairing, the two neighbours arrange the work and split the cost. HDB's recommended method is re-screeding the bathroom floor, which removes the pedestal pan. A seal replaced early is a much smaller job.
If the ceiling below is already stained, read how to detect water leakage in the ceiling, and who pays for an HDB ceiling leak.
How much does it cost to fix a leaking toilet bowl in Singapore?
Most toilet bowl leaks are part repairs: SG QuickFix diagnoses a leak from $80 and replaces a dripping hose from $60, plus the hose. A new bowl is usually needed only for a crack that leaks, or if an old cemented bowl breaks when lifted.
| What the test found | Job | SG QuickFix price |
|---|---|---|
| Source not clear yet | Toilet bowl leak diagnosis | From $80 |
| Braided hose dripping | Flexible hose replacement, plus hose | From $60 |
| Valve or pipe joint behind the bowl | Toilet plumbing leak repair | From $80 |
| Cistern-to-bowl joint or inner seals | Internal cistern repair | From $80 |
| Water passing into the bowl | Flush valve replacement, plus part | From $90 |
| Cracked bowl, new basic bowl | Supply + install basic toilet bowl | From $300 |
| Ceiling below wet, toilet area dry | Concealed leak investigation | From $180 |
Each job is priced separately. A pan collar leak has no fixed row: the bowl must come up, so the price is set after diagnosis and depends on whether it is bedded in cement. Leaks in the pipes around the toilet fall under water leak repair.
Repair or replace?
A crack that stays wet or weeps means a new bowl; sealant on cracked china only buys time. Fine crazing in the glaze that stays dry is cosmetic. Under PUB's water efficiency labelling rules, only 2-tick or better fittings may be supplied and installed since 1 Apr 2019; a 2-tick dual-flush cistern uses at most 4 litres per full flush. For bowl prices, see HDB toilet bowl replacement cost and the full plumber price list for Singapore.
For an accurate price, send a photo of the wet area and one of the hoses behind the bowl, and say whether water appears only after flushing.
Who can fix a leaking toilet: DIY, handyman or licensed plumber?
You can test for leaks yourself; replacing the cistern's flushing mechanism or hose is simple work, but the bowl needs a PUB Licensed Plumber.
PUB's simple works cover the cistern's flushing mechanism and the flexible hose after the ball valve; the toilet bowl itself is regulated sanitary work. PUB's list doesn't name the inlet (fill) valve or the angle valve, so have a PUB Licensed Plumber replace either. If the fix means lifting the bowl, check that whoever does it is licensed by PUB. See which plumbing jobs need a PUB-licensed plumber. For cistern repairs and hoses, see toilet repair prices.
| Safe to DIY if… | Call a professional if… |
|---|---|
| You are running the dry-tissue or tablet test | Water appears at the base seam after flushing |
| A hose nut weeps and a hand quarter-turn stops it | The angle valve itself drips: it isn't on PUB's handyman list, so a PUB Licensed Plumber replaces it |
| The cistern float or flush valve needs adjusting | The cistern-to-bowl joint or a crack is leaking |
| The floor is wet only after showers, and every joint is dry | The ceiling in the flat below is stained |
| Never: silicone the base to stop a leak (it hides the water under the tiles) | The leak comes back or the source isn't clear: have it diagnosed |
| Never | The bowl must be lifted, resealed or replaced: PUB Licensed Plumber work |
What happens when you WhatsApp us?
- 1WhatsApp us a photo or short video of the problem.
- 2We confirm the price before we come.
- 3A technician arrives at the agreed time.
- 4The job is done and you pay only the confirmed price.
Toilet Repair
From $80
- Cistern & flush repair
- Seal & gasket replacement
Toilet Repair FAQs
A brand new toilet bowl that leaks usually has an installation fault, not a faulty bowl: a hose nut not tightened, a cistern not seated evenly on its washers, or a pan collar pushed in at an angle. Water that appears only after flushing points to the collar. Ask the installer to come back before the floor gets soaked.
Silicone around the base of a toilet bowl doesn't stop a leak from the seal underneath. It hides the water, which then soaks under the tiles and into the screed instead of showing on the floor. Find and fix the source first; a neat bead of sealant is a finish, not a repair.
You can use a toilet that leaks clean water from a hose or cistern for a short time, with the floor kept dry. If dirty water appears at the base after flushing, use another toilet if you can and arrange the repair within days, because every flush pushes waste water under the bowl.
Request PUB leak detection tablets online through the Water Saver Pack request on PUB's water-saving items page. Drop one tablet into the toilet cistern, don't flush, and wait 10 to 20 minutes. If coloured water shows in the bowl, the cistern is leaking. A few drops of food colouring work the same way.
No. HDB says flat owners maintain their flat, including the sanitary branch pipes, while the town council maintains the main sanitary pipes. A leak from the toilet bowl, cistern, hose or pan collar is the owner's to fix. Contact the town council only if the leak comes from the common stack or other common property.
Replacing a flexible hose, cistern seal or flush valve usually takes under an hour. Lifting a toilet bowl to replace the pan collar usually takes 1 to 2 hours when the bowl is only sealed, and longer when it is bedded in cement. The seal or cement then needs time to set before heavy use.
Related services
Serving Bedok, Pasir Ris, Punggol, Sengkang and Tampines and island-wide.
Sources & updates
- PUB: Plumbing works (licensed plumbers and simple works), checked 1 Oct 2026
- PUB: Water-saving items, checked 1 Oct 2026
- PUB: Mandatory Water Efficiency Labelling requirements (PDF), checked 1 Oct 2026
- HDB: Home care guide, toilets, checked 1 Oct 2026
- HDB: Home care guide, ceiling leaks, checked 1 Oct 2026
- HDB: Home care guide, pipes, checked 1 Oct 2026
- HDB: Renovation guidelines, water and sanitary plumbing works and gas works, checked 1 Oct 2026
- Updated 1 Oct 2026: First published
Related guides

HDB Toilet Bowl Replacement Cost (2026): Labour, Bowl and Extras
Replacing a toilet bowl in an HDB flat costs from $180 in labour at SG QuickFix if you supply the bowl, or from $300 with a basic bowl supplied. A new hose is priced separately. Measure the outlet distance before buying. PUB reserves changing a toilet bowl for a PUB Licensed Plumber.
Updated 25 Oct 2026 · 8 min read

Toilet Keeps Running After Flushing? How to Fix an HDB Cistern
A toilet keeps running after a flush when the inlet valve doesn't shut off, so water spills into the overflow pipe, or when the outlet-valve seal leaks into the bowl. In an HDB flat, lift the cistern lid and check the water level first. SG QuickFix fixes a running toilet from $70.
Updated 3 Oct 2026 · 7 min read

Water Heater Leaking: What It Means and When to Replace It
If your water heater is leaking in Singapore, switch it off and close its water valve; Singapore's Consumer Product Safety Office says not to use a leaking heater. A small drip from the pressure relief valve while heating is normal. Leaking joints are repairable; a leaking storage tank means replacement. SG QuickFix repairs water heater pipe leaks from $80.
Updated 20 Nov 2026 · 7 min read
Still need help with toilet repair?
WhatsApp us a photo and get a clear price before we come. Open 24 hours, island-wide.
This guide is general information for homes in Singapore. It is not professional, legal or safety advice for your specific situation. Electrical, gas and some plumbing work can be dangerous, and Singapore law requires certain jobs to be done by licensed workers. Any work you carry out yourself is at your own risk, and SG QuickFix accepts no responsibility for any loss, damage or injury arising from the use of this information. Prices shown are current starting prices, may change, and the final price is confirmed before any work begins. Rules and figures from HDB, PUB, EMA, SP Group and town councils were correct when last checked; please confirm with the relevant authority before acting.
